For Honda Odyssey V6 3.5L Fuel Pump 1999 2000 2001 2002 2003 2004 Electric

Description

The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Note the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
For Honda Odyssey V6 3.5L Fuel Pump 1999 2000 2001 2002 2003 2004 Electric
The Function of the fuel pump
is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following
signs
with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline
:
Please Note
the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (
negative
) cable of the battery and ensure that it does not accidentally spark while working.
Picture(
B
)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(
C
)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently.
Picture(
D
)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(
E
)
Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(
F
)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(
G
)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair.
Picture(
H
)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(
I
)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(
J
)
Remove the fuel pump from the tank.
Picture(
K
)
Before installing the new fuel pump use a flashlight to inspect the fuel inside the tank and for excessive contaminates. It's normal to have some dirt and foreign objects but excess partials or bad/rotten fuel will cause the new pump to go out.Clean mounting and seal surfaces using a shop towel and carburetor cleaner, this will ensure a proper seal.
Picture(
L
)
Install the new O ring gasket/seal before installing the new pump assembly.
Picture(
M
)
Gently lower the new fuel pump into the fuel tank taking note on fuel level sender orientation and re-install the mounting ring or bolts.Put the tank back in, fill the tank.
Note before restarting the car:
1.Start engine and check for leaks or problems.
2.Reconnect battery cable.
3.Key may need to be cycled on and off several times to build proper Fuel system pressure.
4.Check for leaks.
Frequently Asked Questions
:
(1.)What
’
s
the function of
fuel pump?
A fuel pump is a component in motor vehicles that transfers liquid from the fuel tank to the carburetor of the internal combustion engine.
(2.)What causes a fuel pump to go bad?
The top reasons for fuel pump failure are contamination,overheating, and the gears in the the fuel pump wearing out over time.By running on a low gas tank, the fuel in the gas tank heats up a lot quicker causing the fuel pump to overheat or even worse, run dry. Avoid leaving your gas tank low whenever possible.
(3.)How do you check fuel pump?
Listen for the fuel pump: Put your ear near the fuel tank and have an assistant turn the ignition key to the “on” position. The fuel pump should make an audible noise if it's working properly. Whack the fuel tank: Have an assistant crank the engine while you hit the fuel tank with a rubber mallet.
Item Specifics
Fuel Pump Type
Electrical
Compatible Fuel
Gas
PSI
85-95
Gallons Per Hour (GPH)
55-65
Placement on Vehicle
Rear
Outlet Type
Quick Connect
Outlet Size
3/8
Inlet Type
Strainer
Inlet Count
2
Outlet Count
2
Terminal Type
Blade
Pin Count
4
Terminal Gender
Male
Connector Gender
Female
Internal Or External Strainer
Internal
In Tank or External
In Tank
Wiring Harness Included
No
Voltage
12.0 2H
Gasket or Seal Included
Yes
Condition
New
Float Included
Yes
Package Contents
Fuel Pump Module Assembly w/Float Arm,Seal
Interchange Part Number
E8642M
Other Part Number
P76531M,SP8019M
Cross Part Number
FG0956,1010354
Superseded Part Number
17045S0XA32,
Weight
2 LB
Fitment Type
Direct Replacement
Warranty
2 Year
Black Pressure Sensor Included
No
Color
White
Custom Bundle
No
OE Spec or Performance/Custom
OE Spec
Modified Item
No
Mounting Hardware Included
No
Brand
Fuel_Kingparts
UPC
Does not apply
Manufacturer Part Number
KF11695402ING
Payment
We only accept payment through PayPal.
Shipping
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Best Sales
For 2009-2010 Ford F-150 5.4L 4.6L 2011-2014 F-150 3.7L 5.0L 6.2L Fuel Pump
USD 58.99
For 2005-2008 Ford F-150 4.2L 2004-2008 Ford F-150 4.6L 5.4L Fuel Pump
USD 43.99
For Pontiac G6 Chevy Malibu 2.4L 3.5L 3.6L 3.9L Saturn Aura 2.4L 3.5L Fuel Pump
USD 68.99
For 2006-2010 Hyundai Sonata V6 3.3L 2006-2007 Hyundai Sonata L4 2.4L Fuel Pump
USD 59.99
For Dodge Ram 1500 V6 3.7L V8 4.7L 5.7L Dodge Ram 2500 3500 V8 5.7L Fuel Pump
USD 62.99
Newly Listed
For Mercury Marine 3.8L 4.3L 5.3L Fuel Pump Assembly 18-7284 41141A2 862077A1
USD 62.49
For 2006-12 Mitsubishi Eclipse L4 2.4L 2006-12 Mitsubishi Galant 2.4L Fuel Pump
USD 65.99
For Kawasaki NINJA ZX-6R ZX6R 2007 2008 2009 2010 2011-2016 Fuel Pump Filter
USD 14.49
For 2008 2009 Cadillac CTS V6 3.6L Fuel Pump Electric E3798M
USD 71.19
For 2012-2015 Buick LaCrosse 3.6L 2013-2015 Buick Regal Cadillac XTS Fuel Pump
USD 80.99
Terms & Contact
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
For Honda Odyssey V6 3.5L Fuel Pump 1999 2000 2001 2002 2003 2004 Electric
The Function of the fuel pump
is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following
signs
with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline
:
Please Note
the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (
negative
) cable of the battery and ensure that it does not accidentally spark while working.
Picture(
B
)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(
C
)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently.
Picture(
D
)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(
E
)
Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(
F
)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(
G
)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair.
Picture(
H
)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(
I
)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(
J
)
Remove the fuel pump from the tank.
Picture(
K
)
Before installing the new fuel pump use a flashlight to inspect the fuel inside the tank and for excessive contaminates. It's normal to have some dirt and foreign objects but excess partials or bad/rotten fuel will cause the new pump to go out.Clean mounting and seal surfaces using a shop towel and carburetor cleaner, this will ensure a proper seal.
Picture(
L
)
Install the new O ring gasket/seal before installing the new pump assembly.
Picture(
M
)
Gently lower the new fuel pump into the fuel tank taking note on fuel level sender orientation and re-install the mounting ring or bolts.Put the tank back in, fill the tank.
Note before restarting the car:
1.Start engine and check for leaks or problems.
2.Reconnect battery cable.
3.Key may need to be cycled on and off several times to build proper Fuel system pressure.
4.Check for leaks.
Frequently Asked Questions
:
(1.)What
’
s
the function of
fuel pump?
A fuel pump is a component in motor vehicles that transfers liquid from the fuel tank to the carburetor of the internal combustion engine.
(2.)What causes a fuel pump to go bad?
The top reasons for fuel pump failure are contamination,overheating, and the gears in the the fuel pump wearing out over time.By running on a low gas tank, the fuel in the gas tank heats up a lot quicker causing the fuel pump to overheat or even worse, run dry. Avoid leaving your gas tank low whenever possible.
(3.)How do you check fuel pump?
Listen for the fuel pump: Put your ear near the fuel tank and have an assistant turn the ignition key to the “on” position. The fuel pump should make an audible noise if it's working properly. Whack the fuel tank: Have an assistant crank the engine while you hit the fuel tank with a rubber mallet.
Item Specifics
Fuel Pump Type :
Electrical
Compatible Fuel :
Gas
PSI :
85-95
Gallons Per Hour (GPH) :
55-65
Placement on Vehicle :
Rear
Outlet Type :
Quick Connect
Outlet Size :
3/8
Inlet Type :
Strainer
Inlet Count :
2
Outlet Count :
2
Terminal Type :
Blade
Pin Count :
4
Terminal Gender :
Male
Connector Gender :
Female
Internal Or External Strainer :
Internal
In Tank or External :
In Tank
Wiring Harness Included :
No
Voltage :
12.0 2H
Gasket or Seal Included :
Yes
Condition :
New
Float Included :
Yes
Package Contents :
Fuel Pump Module Assembly w/Float Arm,Seal
Interchange Part Number :
E8642M
Other Part Number :
P76531M,SP8019M
Cross Part Number :
FG0956,1010354
Superseded Part Number :
17045S0XA32,
Weight :
2 LB
Fitment Type :
Direct Replacement
Warranty :
2 Year
Black Pressure Sensor Included :
No
Color :
White
Custom Bundle :
No
OE Spec or Performance/Custom :
OE Spec
Modified Item :
No
Mounting Hardware Included :
No
Brand :
Fuel_Kingparts
Manufacturer Part Number :
KF11695402ING
Payment
Shipping
Returns
Contact Us
Warning
We only accept payment through PayPal.
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by email on working days.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All rights reserved.